CaribouDuet LGX with Mosquito kit
CaribouDuet LGX with Mosquito kit
PanelDue
Duet Board
Bondtech Nozzles
CaribouDuet LGX with Mosquito kit
CaribouDuet LGX with Mosquito kit
PanelDue
Duet Board
Bondtech Nozzles

CaribouDuet LGX with Mosquito kit

pre-order
€1,355.00
Tax included , ships in 8-10 weeks

Build yourself a Caribou Duet LGX with high-quality components from renowned brands only. It is based on a rigid frame made of 30mm x 30mm aluminum extrusions.

  • Duet2Wifi by Duet
  • PanelDue 5" or 7" by Duet 
  • Meanwell PSU
  • Bondtech LGX extruder with 1.8° pancake motor
  • 0.9° motors on x and y
  • Motors and heated bed by LDO
  • 0.4mm Nozzle from Bondtech
  • Rods, bearings and optional bearing blocks by Misumi
  • GT3 pulleys by Misumi, GT3 belts by Gates
  • 10mm rods and bearing blocks by Misumi

 
CaribouDuet can be configured to your needs with

  • Slice Engineering Mosquito, Mosquito Magnum hot end
  • 5" or 7" Panel Due
  • SuperPINDA or BL-Touch z-sensor
  • and more options

CaribouDuet is available in three print heights: 220mm, 320mm, and 420mm. Plastic parts offer best sturdiness and functionality and come with a sleek design. 


Currently there is a 4-5 days lead time for all combinations for new orders!

​

Height
  • 220
  • 320
  • 420
Printed Parts
  • no
  • PETG green
Extruder
  • FDM
  • SLS
Hotend
  • Mosquito
  • Mosquito Magnum
Heater
  • E3D 40W
  • SE 50W
Thermistor
  • E3d
  • SE
Display Installation
  • Top
  • Front
Panel Due Size
  • 5"
  • 7"
z-Sensor
  • SuperPINDA
  • BL-Touch

 

Caribou is rigid, reliable, customizable and features:

  • 3030 Aluminium extrusions by MISUMI
  • Hardened steel rods by MISUMI
  • LMU10, LMUW10 Bearings by MISUMI
  • Slice Engineering MOSQUITO hotend option
  • Bondtech extruder 
  • Bondtech nozzle
  • 10mm rods on x,y,z axis
  • MK52 block version
  • MK52 Heated bed with Thekkiinngg steel sheet
  • Meanwell 320W PSU 
  • Duet2Wifi board
  • PanelDue 5" or 7"
  • Automatic mesh bed levelling
  • Magnetic PEI powder coat spring steel sheet
  • IR filament sensor
  • Reverse bowden set-up for smooth filament trans/1port
  • SuperPinda or BL-Touch z-sensor
  • Integrated SD card controller (8GB included)
  • Layer height from 0,05 mm
  • Great build volume – 25 x 21 x 22 cm or 32cm or 42cm width, depth, height)

Assembled Caribous are calibrated and live-z adjusted. You receive 2 test prints. After attaching PanelDue display and spoolholder you are ready to print.

You can configure your Caribou to your needs:


Options in detail:

Extruder:

  • FDM printed with GreenPro black 
  • SLS printed

Hot end:

  • Slice Engineering Mosquito 
  • Slice Engineering Mosquito Magnum


Heater Cartridge:

  • E3d 40W
  • Slice Engineering 50W 


Thermistor:

  • E3d thermistor
  • Slice Engineering thermistor (only with 50W heater, Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Steel sheet:

  • BuildTak steel sheet with smooth PEI sheet
  • Thekkiinngg double sided, PEI textured steel sheet

z-Sensor:

  • SuperPINDA with integrated thermistor
  • BL-Touch

Included:

  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • 2 push-fit connectors and PTFE tube for reverse bowden set-up
  • Extruder cleaning tools
  • bag of Haribos

Firmware

Firmware RepRapfirmware is available here: https://caribou3d.com/en/content/13-caribouduet-software

Source code is available on github: https://github.com/Caribou3d/CaribouDuet2Wifi-ConfigurationMacros


Dimensions:

  • depth: 45cm, width: 40cm, height: 46cm (220), 56cm (320, 66cm (420) without spool holder
  • allow 10cm more on the back for moving cables in the back if you want to use an enclosure
  • weight approx. 12kg

Optional plastic parts:

Plastic parts can be ordered for DUET Rel. 4. Please see below for options.

STLs and STEP files are available on github: https://github.com/Caribou3d/CaribouCartesian

Please allow up to 10 days before shipping when you order plastic parts.

 
You receive all printed parts for building a Caribou DUET. Printed in PETG and Extrudr Pro Black 

  • 0.2mm layer height
  • 35% infill
  • Print time 100h
  • weight approx. 1.2 kg depending on configuration

Full list of printed parts (depending on the selected options):

Customers who bought this product also bought:

Product added to wishlist