E3D Hotends

Showing 1-24 of 24 item(s)

on backorder

E3D Hotends

Revo™ Six Hotend 24V

Revo Six is a drop-in replacement for your E3D V6 HotEnd Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo...

pre-order

E3D Hotends

Revo™ Micro 24V

€97.50

Revo Micro HotEnd is smaller, lighter, and better than ever before Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Caribou, Creality,...

on backorder

E3D Hotends

Revo™ Voron 24V

€92.50

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening

backorder

E3D Hotends

Revo ObXidian™ Nozzle

€53.50

Material: Copper/Hardened Steel Assembly with E3DLC™ coating Input diameter: 1.75mm Maximum temperature: 300°C Nozzles Sizes: 0.4mm, 0.6mm

pre-order

E3D Hotends

Revo™ Nozzle

€26.50

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the...

backorder

E3D Hotends

Revo™ Nozzle Set

€59.50

E3D Hotends

Revo™ Sock Pack

€6.50

Der komplette Revo Sockensatz enthält zwei Socken für jede Revo Nozzle Größe, und zusätzlich zwei für den Revo HeaterCore

E3D Hotends

Revo™ Spring Triple Pack

€2.50

Replacement spring for Revo Micro, Revo Six, and Revo Hemera. Set of 3.

E3D Hotends

Revo™ HeaterCore 24V

€35.95

HeaterCore for the E3D Revo-series. Sprig included.

New product

on backorder

E3D Hotends

Original E3D Hotend 24V (MK3(s))

€72.95

The V6 is E3d's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Fully assmebled. 12V version!

E3D Hotends

Original E3D Hotend 12V (MK2, MK2.5)

€72.95

E3D Hotends

E3D v6 HeatSink - 1.75mm Universal

€14.50

A replacement HeatSink for 1.75mm V6 Hotends. Please note - this product fits both Bowden and Direct Drive Hotends

E3D Hotends

Collet Clips (Pack of 2)

€0.50

Collet clips which prevent accidental PTFE releases and allow easy identification of filament diameters. Blue is for 1.75mm filament.

E3D Hotends

Embedded Bowden Coupling for Metal

€1.95

Pneumatic fittings

E3D Hotends

E3D V6 Heater Block for Sensor Cartridges

€12.95

A replacement aluminium V6 heater block, suitable for E3D cartridge-style temperature sensors.

on backorder

E3D Hotends

Fixing Kit (v6)

€1.80

Spare bag of fixings for the E3D-v6 HotEnd.

E3D Hotends

Microswiss Plated Wear Resistant HeatBreak

€18.95

This heatbreak is a direct replacement for use in E3D v6 1.75mm hotends.

E3D Hotends

Heater Cartridge 24V

€11.95

A powerful little beast of a heater (24V). Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your Hotend hot quickly and hit the highest of temperatures.

E3D Hotends

Heater Cartridge 12V 40W

€11.95

A powerful little beast of a heater (12V). Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your Hotend hot quickly and hit the highest of temperatures.

on backorder

E3D Hotends

E3D Thermistor Cartridge

€6.95

1020Replacement E3D thermistor (Semitec 104Gt) for E3D and Mosquito hotends in Caribou, Prusa MK3s, bear 3d printers.

E3D Hotends

E3D Brass Nozzles - V6

€6.50

Brass nozzle for 1.75mm filament

E3D Hotends

Thermal Compound Paste

€1.50

Thermal paste is required to transfer heat from the Heatbreak to the Heatsink effectively.

E3D Hotends

E3D Silicone Sock

€4.95

A pack of 3 new and improved high temperature non-stick silicone socks for E3D Hotends. Keep your heater block clean and well-insulated with a cosy blue sock.

E3D Hotends

E3D V6 Heat Break

€13.50

This is a replacement Heatbreak for E3D V6 1.75mm Bowden and Direct Hotends.

Legal Information

Account Information

Company

Contact us

Caribou3d Research & Development

Kirchplatz 1, 53424 Remagen, Germany

+49 (0) 2642 984 868 1

support@caribou3d.com

Offfice hours:

Mon - Fri: 10:00AM - 06:00PM
Sat:       10:00AM - 06:00PM 
Sun:       closed

Name	Provider	What it does	Expiry	Allow (Check all)
Currency Selection	PrestaShop	Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown.	30 days	Allow
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow
Shopping cart	PrestaShop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow

E3D Hotends

Necessary