Hotends

Showing 1-24 of 51 item(s)

on backorder

E3D Hotends

Revo™ Six Hotend 24V

Revo Six is a drop-in replacement for your E3D V6 HotEnd Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo...

Nozzles

Bondtech CHT™ Coated Brass Nozzle 1.75mm

€19.80

Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows the RepRap standard (M6×1×7.5×12.5 1.75)

Slice Engineering Hotends

Mosquito™ Hotend

€179.00

Larger temperature range up to 450°C Easy nozzle change Modular/adaptable to almost any FFF/FDM printer New heat break with reinforced throat Revised heat sink New heat sink with wider filament path opening

Bondtech CHT® Coated Brass Nozzle 5 pack

Nozzles

Bondtech CHT® Coated Brass Nozzle 5 pack

€86.50

pre-order

E3D Hotends

Revo™ Micro 24V

€97.50

Revo Micro HotEnd is smaller, lighter, and better than ever before Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Caribou, Creality,...

Slice Engineering Hotends

Mosquito Magnum™ Hotend

€203.00

Extended melt zone New heat break with reinforced throat Revised radiator to prevent damage during installation and repairs. New heat sink with wider opening for the filament path Simple nozzle change

on backorder

E3D Hotends

Revo™ Voron 24V

€92.50

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening

Slice Engineering Hotends

Mosquito™ Hotend Upgrade Bundle

€72.50

Mosquito™ Heat Break - Standard - Current Mosquito™ Heat Sink - Current

on backorder

Nozzles

Bondtech Brass Nozzle

€8.95

Brass nozzle Affordable price Machined with ultra-precision

backorder

E3D Hotends

Revo ObXidian™ Nozzle

€53.50

Material: Copper/Hardened Steel Assembly with E3DLC™ coating Input diameter: 1.75mm Maximum temperature: 300°C Nozzles Sizes: 0.4mm, 0.6mm

on backorder

Slice Engineering Hotends

Mosquito Magnum™ Hotend Upgrade Bundle

€82.50

Mosquito Magnum™ Heat Break - Standard - Current Mosquito™ Heat Sink - Current

on backorder

Nozzles

Bondtech Nickel Coated Nozzle

€14.50

Brass nozzle with Nickel coated surface Affordable price Machined with ultra-precision

pre-order

E3D Hotends

Revo™ Nozzle

€26.50

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the...

Slice Engineering Hotends

Mosquito Silicone Boot

€10.50

Fits Mosquito and Mosquito Magnum hotends.

Microswiss Plated Wear Resistant Nozzle 2

Nozzles

Microswiss Plated Nozzle

€17.95

TwinClad XT coated nozzle for 1.75mm filament

backorder

E3D Hotends

Revo™ Nozzle Set

€59.50

Microswiss Plated A2 Hardened Tool Steel Nozzle

Nozzles

Microswiss Hardened Nozzle

€21.95

Plated A2 Hardened Tool Steel Nozzle

Slice Engineering Hotends

SE Heater Cartridge 24V 50W

€22.50

50W heater cartridge for Mosquito (Magnum) hotends.Now shipping with 1.2m long bare leads.

E3D Hotends

Revo™ Sock Pack

€6.50

Der komplette Revo Sockensatz enthält zwei Socken für jede Revo Nozzle Größe, und zusätzlich zwei für den Revo HeaterCore

E3D Hotends

Revo™ Spring Triple Pack

€2.50

Replacement spring for Revo Micro, Revo Six, and Revo Hemera. Set of 3.

Slice Engineering Hotends

Slice Engineering Thermistor 300°C

€31.50

20High performing thermistor, measure up to 300°C Capable of reading from room temperature up to 300°C 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors 2m long bare leads 5mm long filler shaft

E3D Hotends

Revo™ HeaterCore 24V

€35.95

HeaterCore for the E3D Revo-series. Sprig included.

Slice Engineering Hotends

Mosquito Extension Cable 1m

€2.95

Verlängerung für den Thermistor oder einen Lüfter

New product

on backorder

E3D Hotends

Original E3D Hotend 24V (MK3(s))

€72.95

The V6 is E3d's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Fully assmebled. 12V version!

Hotends

Legal Information

Account Information

Company

Contact us

Caribou3d Research & Development

Kirchplatz 1, 53424 Remagen, Germany

+49 (0) 2642 984 868 1

support@caribou3d.com

Offfice hours:

Mon - Fri: 10:00AM - 06:00PM
Sat:       10:00AM - 06:00PM 
Sun:       closed

Name	Provider	What it does	Expiry	Allow (Check all)
Currency Selection	PrestaShop	Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown.	30 days	Allow
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow
Shopping cart	PrestaShop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow

Hotends

Necessary