CaribouDuet LGX with Mosquito
CaribouDuet LGX with Mosquito
PanelDue Display
Duet Board
Bondtech Düse
CaribouDuet LGX with Mosquito
CaribouDuet LGX with Mosquito
PanelDue Display
Duet Board
Bondtech Düse

CaribouDuet LGX with Mosquito

€1,610.00
, ships in 2-3 weeks

CaribouDuet LGX is built with high-quality components from renowned brands only. It is based on a rigid frame made of 30mm x 30mm aluminum extrusions.

  • Duet2Wifi by Duet
  • PanelDue 5" or 7" by Duet 
  • Meanwell PSU
  • Bondtech LGX extruder with 1.8° pancake motor
  • 0.9° motors on x and y
  • Motors and heated bed by LDO
  • 0.4mm Nozzle from Bondtech
  • Rods, bearings and optional bearing blocks by Misumi
  • GT3 pulleys by Misumi, GT3 belts by Gates
  • 10mm rods and bearing blocks by Misumi

 
CaribouDuet LGX can be configured to your needs with

  • Slice Engineering Mosquito, Mosquito Magnum hot end
  • 5" or 7" Panel Due
  • SuperPINDA or BL-Touch z-sensor
  • and more options

CaribouDuet LGX is available in three print heights: 220mm, 320mm, and 420mm. Plastic parts offer best sturdiness and functionality and come with a sleek design. 


Currently there is a 2-3 week lead time for all combinations for new orders!

 

Height
  • 220
  • 320
  • 420
Extruder
  • FDM
  • SLS
Hotend
  • Mosquito
  • Mosquito Magnum
Heater
  • E3D 40W
  • SE 50W
Thermistor
  • E3d
  • SE
Display Installation
  • Top
  • Front
Panel Due Size
  • 5"
  • 7"
z-Sensor
  • SuperPINDA
  • BL-Touch

 

CaribouDuet LGX is rigid, reliable, customizable and features:

  • 3030 Aluminium extrusions by MISUMI
  • Hardened steel rods by MISUMI
  • LMU10, LMUW10 Bearings by MISUMI
  • Slice Engineering MOSQUITO hotend option
  • Bondtech extruder LGX Extruder
  • Bondtech nozzle
  • 10mm rods on x,y,z axis
  • MK52 block version
  • MK52 Heated bed with Thekkiinngg steel sheet
  • Meanwell 320W PSU 
  • Duet2Wifi board
  • PanelDue 5" or 7"
  • Automatic mesh bed levelling
  • Magnetic PEI powder coat spring steel sheet
  • IR filament sensor
  • Reverse bowden set-up for smooth filament trans/1port
  • SuperPinda or BL-Touch z-sensor
  • Integrated SD card controller (8GB included)
  • Layer height from 0,05 mm
  • Great build volume – 25 x 21 x 22 cm or 32cm or 42cm width, depth, height)

Assembled Caribous are calibrated and live-z adjusted. You receive 2 test prints. After attaching PanelDue display and spoolholder you are ready to print.

You can configure your CaribouDuet LGX to your needs:


Options in detail:

Extruder:

  • Bondtech LGX Extruder
  • FDM printed with GreenPro black 
  • SLS printed


Hot end:

  • Slice Engineering Mosquito
  • Slice Engineering Mosquito Magnum 


Heater Cartridge:

  • E3d 40W
  • Slice Engineering 50W

Thermistor:

  • E3d thermistor
  • Slice Engineering thermistor (only with 50W heater, Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Steel sheet:

  • BuildTak steel sheet with smooth PEI sheet
  • Thekkiinngg double sided, PEI textured steel sheet

z-Sensor:

  • SuperPINDA with integrated thermistor
  • BL-Touch

Included:

  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • 0.8kg of PLA filament by Fillamentum
  • 2 push-fit connectors and PTFE tube for reverse bowden set-up
  • Extruder cleaning tools
  • bag of Haribos

Firmware
Firmware RepRapfirmware is available here: https://caribou3d.com/en/content/13-caribouduet-software

Source code is available on github: https://github.com/Caribou3d/CaribouDuet2Wifi-ConfigurationMacros


Dimensions:

  • depth: 45cm, width: 40cm, height: 46cm (220), 56cm (320, 66cm (420) without spool holder
  • allow 10cm more on the back for moving cables in the back if you want to use an enclosure
  • weight approx. 12kg

Customers who bought this product also bought:

Product added to wishlist