Product available with different options

CaribouIDEX is built with high-quality components from renowned brands only. It is based on a rigid frame made of 30mm x 30mm aluminum extrusions.

  • Duet3Mini5+
  • PanelDue  5" or 7" TFT touch screen
  • CAN boards on both extruders
  • SLS printed extruder parts
  • Meanwell PSU
  • 0.9° motors on x and y
  • Motors by LDO
  • IGUS energy chains
  • Bondtech LGX extruders with 1.8° pancake motor
  • 0.4mm Nozzles
  • Extruder quick release

The IDEX architecture (Independent Dual Extrusion) has been developed to counteract the disadvantages of double extruders. It is the most reliable and clean solution available on the market for dual extrusion technology. With the IDEX architecture, the two extruders work independently when printing water-soluble supports or multi-material parts.

While one extruder is actively printing, the second one remains parked, preventing any molten plastic from dripping onto the part. In contrast, conventional dual extrusion printers have both extruders together, which can result in filament threads being left on the printed piece.
You can print with both extruders individually, in copy- or in mirror mode. This doubles yput productivity.


CaribouIDEX is rigid and reliable and features:

  • 3030 Aluminum extrusions by MISUMI
  • Duet3Mini5+ board
  • PanelDue 5" or TFT touch screen 
  • Duet CAN boards
  • Phaetus BMO hotend
  • Bondtech LGX Extruder
  • Meanwell 320W PSU 
  • Magnetic PEI powder coat spring steel sheet (Thekkiinngg)
  • Wi-Fi connection
  • Independent z-axes with tilt correction
  • Automatic mesh bed levelling
  • Reverse bowden set-up for smooth filament transport
  • SuperPinda 
  • Layer height from 0,05 mm
  • Build volume – 25cm x 21cm x 30cm (width, depth, height)

Assembled Caribous are calibrated and z adjusted. You receive 2 test prints. After attaching the display and spoolholder you are ready to print.




  • Bondtech LGX Lite Extruders

Hot end:

  • E3d Revo or Slice Engineering Mosquito

Steel sheet:

  • Thekkiinngg double sided, PEI textured steel sheet


  • SuperPINDA with integrated thermistor


  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • 2 push-fit connectors and PTFE tube for reverse bowden set-up
  • Extruder cleaning tools

Duet RepRap firmware


  • depth: 41icm, width: 52cm, height: 50cm without spool holder, handle and eclosure
  • weight approx. 14kg
Product added to wishlist