Extruder Selection

Showing 1-18 of 18 item(s)

Bondtech Extruders

Bondtech MK3S / MK2.5S Mosquito upgrade

Lightweight high-resolution extruder upgrade for the popular Prusa i3 MK3S and MK2.5S 3D printers Optimized to use with Mosquito and Mosquito Magnum hotends.

Bondtech Extruders

Bondtech MK2.5S / MK3S Extruder Upgrade

€130.00

Lightweight high-resolution extruder upgrade for Caribou, bear, and the Prusa MK3S 3D printers Upgrade kit is compatible only with the original all metal E3d V6 hotend

on backorder

Bondtech Extruders

Bondtech MK3S Mosquito Housing Kit

€65.00

Upgrade your Prusa MK3S Upgrade Kit to Mosquito!This SLS Spare Parts Kit can be used to upgrade the Upgrade Kit for Prusa MK2S / MK3S to fit Mosquito hotends.

Bondtech Extruders

Bondtech LGX™ Set For Prusa MK3S (For Flexibles)

€276.00

The kit contains: Bondtech LGX™ eXtruder Bondtech LGX™ For Flexibles Set LGX™ Accessories for FF Prusa MK3S This extruder only supports 1.75 mm size filament. The x-carriage is made for Prusa, it is NOT compatible with Caribou.

on backorder

LDO Extruders

LDO GALILEO Clockwork Kit

€67.50

2Comes with Bondtech dual gears from Bondtech.

Slice Engineering Hotends

Mosquito™ Hotend

€179.00

Larger temperature range up to 450°C Easy nozzle change Modular/adaptable to almost any FFF/FDM printer New heat break with reinforced throat Revised heat sink New heat sink with wider filament path opening

Slice Engineering Hotends

Mosquito Magnum™ Hotend

€203.00

Extended melt zone New heat break with reinforced throat Revised radiator to prevent damage during installation and repairs. New heat sink with wider opening for the filament path Simple nozzle change

on backorder

LDO Extruders

LDO ORBITER Extruder V2.0 (1.75mm)

€68.50

Smaller, lighter, optimized design Hardened filament drive gears manufactured by Bondtech Designed by Dr. Robert Lorincz Manufactured by LDO Motors For 1.75mm filament only!

on backorder

E3D Hotends

Revo™ Six Hotend 24V

€97.50

Revo Six is a drop-in replacement for your E3D V6 HotEnd Same height, diameter, and mounting as the E3D V6 all-metal HotEnd No machine redesign needed - drops right into your existing setup Compatible with Revo Nozzles – swap nozzles at room temperature without tools or hot tightening Anodised black sink and crystal-clear fan mount with fan included Revo...

E3d Extruder

Revo™ Hemera 24V

€178.50

Revo Hemera is a compact, powerful extrusion system Compatible with Revo Nozzles [MJ1] so you can change nozzles at room temperature using just your fingers Custom motor end-caps provide convenient T-slots for flat mounting, leaving plenty of room for other accessories, like bed levelling probes or part cooling fans Compatible with many popular 3D...

pre-order

E3D Hotends

Revo™ Nozzle

€26.50

Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening Compatible with Revo cold sides, including Revo Six, Revo Micro, and Revo Hemera No need to hot tighten – each Revo Nozzle is a factory-assembled nozzle and heatbreak in one Works with a Revo HeaterCore for faster heat-ups and greater efficiency than most HotEnds on the...

pre-order

E3D Hotends

Revo™ Micro 24V

€97.50

Revo Micro HotEnd is smaller, lighter, and better than ever before Designed for use with Revo Nozzles Works with a Revo HeaterCore for faster heat-ups Smallest and lightest HotEnd we’ve produced so far Titanium-like performance Ultra-lightweight construction for improved speed performance Compatible with popular 3D printers including Caribou, Creality,...

backorder

E3D Hotends

Revo™ Nozzle Set

€59.50

on backorder

Bondtech for Prusa

Bondtech IFS™ Extruder for Prusa Mini or Mini+t For Prusa Mini

€76.50

This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini.

Bondtech for Prusa

Prusa Mini Extruder Upgrade To IFS™

€34.50

This is a set of plastic parts that allows to upgrade the previous “Upgrade Kit For Prusa Mini” to be IFS (Internal Filament Sensor) compatible.

on backorder

E3D Hotends

Revo™ Voron 24V

€92.50

Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening

on backorder

LDO Extruders

LDO ORBITER Extruder V2.0 (1.75mm) No Motor

€54.50

Smaller, lighter, optimized design Hardened filament drive gears manufactured by Bondtech Designed by Dr. Robert Lorincz Manufactured by LDO Motors For 1.75mm filament only! Without Motor!

backorder

E3D Hotends

Revo ObXidian™ Nozzle

€53.50

Material: Copper/Hardened Steel Assembly with E3DLC™ coating Input diameter: 1.75mm Maximum temperature: 300°C Nozzles Sizes: 0.4mm, 0.6mm

Legal Information

Account Information

Company

Contact us

Caribou3d Research & Development

Kirchplatz 1, 53424 Remagen, Germany

+49 (0) 2642 984 868 1

support@caribou3d.com

Offfice hours:

Mon - Fri: 10:00AM - 06:00PM
Sat:       10:00AM - 06:00PM 
Sun:       closed

Name	Provider	What it does	Expiry	Allow (Check all)
Currency Selection	PrestaShop	Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown.	30 days	Allow
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow
Shopping cart	PrestaShop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow

Extruder Selection

Necessary