Caribou 220 to Caribou 320 Upgrade Kit
Caribou 220 to Caribou 320 Upgrade Kit
Caribou 220 to Caribou 320 Upgrade Kit
Caribou 220 to Caribou 320 Upgrade Kit

Caribou 220 to Caribou 320 Upgrade Kit

€138.50
, ships in 1-2 days

Upgrade your Caribou 220 to a Caribou 320. Optional get 10mm rods on each axis and the bed carriage supported by aluminium blocks
 

Rod diameter
  • 8mm
  • 10mm
Carriage
  • MK52

 

 
Print height is 320mm.
  

A detailed assembly Manual for Rel 3. is available in English and German!

Please download here: https://caribou3d.com/en/content/9-build-manual

 

Firmware

Compiled firmware is available here: https://caribou3d.com/en/content/10-caribou-firmware

Source code is available on github: https://github.com/Caribou3d/Caribou-Firmware

  

Caribou 220 to Caribou 320 upgrade kit contains:

  • Flextube 12.4mm (set with 70cm)
  • Flextube 6.4mm (set with 140cm)
  • Nylon Filament  (170cm)
  • LCD sleeve (45cm)
  • Zip tie bag
  • Slot cover 50cm
  • z- axis Extrusion 430mm  (set of 2) 
  • 422mm rod (set of 2) (8mm or optional 10mm)
  • z-Motor 420mm, 400mm cable + POM
  • z-Motor 420mm, 600mm cable + POM
  • Motor extension cable 20cm
  • Filament Sensor Cable extension (10cm)
  • Fan extension cable (short)

Options

Linear rods (x,y,z) 8mm or 10mm

The 10mm version add stability and smoothness to the axes. The two short bearing on each side of the z-axis and the two bearings on the upper x-axis are replaced by a 55mm bearing.

The 10mm version of the kit contains in addition:

  • 4x LMU10 (24mm long bearing)
  • 3x LMUW10 (55mm long bearing)
  • 2x PSFU10-360mm (y-axis) rods 
  • 2x PSFU10-422mm rods (z-axis) 
  • 2x PSFU10-380 (x-axis)
  • 3x HFSB-3030-359-Z8-XA12-XB347 (5mm wider x-axis)

MK52 regular or block version

Bring the y-axis to a new level. The bearings are contained in aluminium blocks hence they can be easier aligned and run smoother. The MK52-block version contains:

  • 1x LMU10 (24mm long bearing)
  • 3x LMUW10 (55mm long bearing)
  • 3x LHBB (aluminium blocks)
  • 2x PSFU10-360mm (y-axis) rods 
  • 2x PSFU10-422mm rods (z-axis)
  • 2x PSFU10-380 (x-axis)
  • 3x HFSB-3030-359-Z8-XA12-XB347 (5mm wider x-axis),
  • x-carriage for blocks
  • 10g of screw lock
  • 12x M5 x 18mm screws
  • 12x M5 washer



No reviews

Customers who bought this product also bought:

Product added to wishlist