X-Carriage kit for Prusa i3 MK3S

Name: X-Carriage kit for Prusa i3 MK3S
Brand: Caribou3d Research & Development
SKU: 256
Price: 11.5 EUR
Availability: InStock

€11.50

ships in 1-2 days

An X-Carriage kit is required to install the Bondtech Upgrade Kit for Prusa i3 MK3S. This version is suitable to print at room temperature.

Included in this product:

X-Carriage Front
X-Carriage Rear
5x M3x10 Screws
5x M3 square nut
1x M3 nut

Note: If you print inside an enclosed chamber use the SLS version instead, to allow heating the air inside above 60°C.

Sicherheitsdatenblatt

Download (421.76KB)

Bondtech MK2.5S / MK3S Extruder Upgrade

Bondtech

€130.00

Lightweight high-resolution extruder upgrade for Caribou, bear, and the Prusa MK3S 3D printers Upgrade kit is compatible only with the original all metal E3d V6 hotend

on backorder

Bondtech for Prusa

SLS X-Carriage kit for Prusa i3 MK3S

Bondtech

€39.50

High Temperature X-Carriage An X-Carriage kit is required to install our Bondtech Upgrade Kit for Prusa i3 MK3S.This SLS version is for users that work with enclosed chambers and heat the air inside above 60°C

Customers who bought this product also bought:

Set of Misumi LMU8 Linear Bearings | Bushings

on backorder

Rods, Bearings

Set of Misumi LMU8 Linear Bearings | Bushings

€46.50

Linear Bearing (long) for 8mm linear rods stainless steel high precsision compatible with Prusa MK2, MK2.5(s), MK3(s) set of 10 pieces

Slice Engineering Hotends

Mosquito Magnum™ Hotend

€203.00

Extended melt zone New heat break with reinforced throat Revised radiator to prevent damage during installation and repairs. New heat sink with wider opening for the filament path Simple nozzle change

Slice Engineering Hotends

SE Heater Cartridge 24V 50W

€22.50

50W heater cartridge for Mosquito (Magnum) hotends.Now shipping with 1.2m long bare leads.

Power Supplies, Fans

Meanwell RSP-320-24

€58.50

AC-DC Single Output Enclosed power supply; Output 24VDC Single Output at 13.4A; PFC; forced air cooling; 1U low profile

on backorder

Slice Engineering Hotends

Mosquito Boron Nitride Paste

€10.50

Thermal paste for improving conduction

Print surface

Original Thekkiinngg sheet V4

€49.50

30Double-sided textured PEI powder-coated spring steel sheet for Caribou MK2.5(s) / MK3(s), CaribouDuet for Prusa MK2.5(s) / MK3(s) Dimensions: 250mm x 240mm DON'T clean with acetone!

on backorder

Power Supplies, Fans

Radial cooling fan 5015 5V by LDO

€8.50

60High-quality radial cooling fan (DF5015H05S), 5V version for Caribou, bear, Prusa MK2, Mk2.5(s) MK3(s) manufactured by LDO.

Power Supplies, Fans

Sunon 5V 4040mm fan with 65cm cable + connector

€9.95

Sunon fans come with 65cm cable and with the necessary connector. Screws are optional.

on backorder

Screws, Nuts

Square nuts M3 (flat form)

€2.50

Square nut, DIN 562, M3, 1.7mm thick

Screws, Nuts

M3 nut (50x)

€2.50

Pack of M3 nuts, DIN 934

Legal Information

Account Information

Company

Contact us

Caribou3d Research & Development

Kirchplatz 1, 53424 Remagen, Germany

+49 (0) 2642 984 868 1

support@caribou3d.com

Offfice hours:

Mon - Fri: 10:00AM - 06:00PM
Sat:       10:00AM - 06:00PM 
Sun:       closed

Name	Provider	What it does	Expiry	Allow (Check all)
Currency Selection	PrestaShop	Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown.	30 days	Allow
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow
Shopping cart	PrestaShop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow

X-Carriage kit for Prusa i3 MK3S

Customers who bought this product also bought:

Necessary