LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit
LDO VORON V0.1 Printer Kit

LDO VORON V0.1 Printer Kit

Pre-order for batch 4
€685.00

All new orders are for batch 3, expected mid / end of January. This may change due to transport time or customs. 

 
Includes:

  • LDO Frame
  • LDO V0.1 Motor Kit
  • LDO Rail Kit
  • Phaetus Dragonfly BMO
  • Pre Made Wire kit
  • Fans, heaters, buck converter, hardware, tools
  • 2 Flex Build plates (one powder coated and one smooth PEI) and magnet
  • Cast aluminum bed
  • Raspberry Pi 3B
  • Meanwell LRS-150-24
  • SKR Mini
  • Acrylic enclosure

Plastic parts are not included. Please see below for a link to the printed parts guide.

Color
  • black
  • purple
  • blue
  • green
  • red
  • orange
  • gold

 

All Voron printers are built with CoreXY or CoreXZ configurations to reduce the amount of moving mass and allow for greater acceleration and speed.

Features and extras

  • Stainless Steel Linear Rails - That's right, no more worrying about rusty rails. You'll still want to grease these rails, but you can do it at the end of your build.

  • Machined Rail Nuts - Our kit includes 5 custom machined T nuts to secure the linear rails onto the extrusions, (no need to fiddle with tiny m2 nuts on a thin plastic part)

  • Brass Insert Tool - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.

  • Pre-cut & Pre-wired - Our kit includes all necessary wiring: cut to just the right length and pre-crimped or soldered to their respective parts. See our supplementary wiring guide here.

  • Two Types of Nuts - We've included both black oxide hex nuts and stainless square nuts in our kit, use whichever type you prefer.

  • Partially Threaded Screws - The small pack of partially threaded SHCS screws (M3x30/x35) are for the mini-afterburner, they help reduce wear on the idler and Latch parts.

  • Hex Wrenches - We found that 1.5mm hex wrenches wear out easily, so we threw in a bunch of them. However, you should definitely still buy a set of good quality hex wrenches.

  • Threadlocker - We included a small tube of threadlocker. Use it on all the grub(set) screws.

  • 2mm Drill Bit - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

Guides

  • Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.

  • Wiring Guide - LDO created this supplementary wiring guide to make wiring your printer a breeze.

  • Nuts in 1515 Extrusions - See our 1515 short nut guide here for tips on handling nuts in 1515 aluminum extrusions.
     

Resources

  • Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_0_questions channel.

  • Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.

  • Check out Nero 3DP's Youtube channel, he has a ton of videos on assembling Voron printers.

  • Get a official serial number once you finish building your Voron.

You might also like

Customers who bought this product also bought:

Product added to wishlist