CaribouM front side
CaribouM fornt
CaribouM Extruder front
CaribouM Extruder back
CaribouM Display
CaribouM front side
CaribouM fornt
CaribouM Extruder front
CaribouM Extruder back
CaribouM Display

CaribouM

pre-order
€1,310.00
Tax included shipping starts beginning of July

CaribouM is built with high-quality components from renowned brands only. It is based on a rigid frame made of 30mm x 30mm aluminum extrusions.

  • BTT MantaM8P with CB1
  • BTT 5" TFT touch screen with Klipperscreen
  • EBB36 CAN board on the extruder
  • Klipper firmware
  • Meanwell PSU
  • Genuine HIWIN  or LDO linear rails
  • 0.9° motors on x and y
  • Motors by LDO
  • IGUS energy chains
  • Bondtech LGX Lite extruder with 1.8° pancake motor
  • 0.4mm Nozzle


Printed Parts
  • no
  • PETG green
Rails
  • HIWIN
  • LDO

 

CaribouM is rigid, reliable, space saving and features:

  • Genuine HIWIN or LDO linear rails for smooth operation
  • 3030 Aluminum extrusions by MISUMI
  • BTT MantaM8P
  • BTT 5" TFT touch screen 
  • EBB36 CAN board 
  • Phaetus BMO hotend
  • Bondtech extruder LGX Lite Extruder
  • Meanwell 200W PSU 
  • Magnetic PEI powder coat spring steel sheet (Thekkiinngg)
  • Wi-Fi and LAN connection
  • Independent z-axes with tilt correction
  • Automatic mesh bed levelling
  • Reverse bowden set-up for smooth filament trans/1port
  • SuperPinda 
  • Ready to enclose (enclosure will be offered separately)
  • Layer height from 0,05 mm
  • Build volume – 18cm x 18cm x 17cm (width, depth, height)

Assembled Caribous are calibrated and z adjusted. You receive 2 test prints. After attaching the display and spoolholder you are ready to print.

Details:

HIWIN Rails:

  • x axis: MGNR12R (12mm wide)
  • y axis: MGW09 (18mm wide)
  • z axis: 2x MGW09 (18mm wide)
     

Extruder:

  • Bondtech LGX Lite Extruder
     

Hot end:

  • Phaetus BMO
     

Steel sheet:

  • Thekkiinngg double sided, PEI textured steel sheet

z-Sensor:

  • SuperPINDA with integrated thermistor
     

Included:

  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • 2 push-fit connectors and PTFE tube for reverse bowden set-up
  • Extruder cleaning tools

Firmware
Firmware is Klipper. An image for the CaribouM will be provided on github.

Dimensions:

  • depth: 34cm, width: 33.4cm, height: 43,2cm without spool holder, handle and eclosure
  • weight approx. 8.4kg
Product added to wishlist