CaribouDuet
CaribouDuet
CaribouDuet
CaribouDuet
CaribouDuet
CaribouDuet
CaribouDuet
CaribouDuet

CaribouDuet

€1,485.00
, ships in 6-8 weeks

CaribouDuet is built with high-quality components from renowned brands only. It is based on a rigid frame made of 30mm x 30mm aluminum extrusions.

  • Duet2Wifi by Duet
  • PanelDue 5" by Duet 
  • Bondtech extruder with 0.9° pancake motor
  • 0.9° motors on x and y
  • Motors and heated bed by LDO
  • Rods, bearings and optional bearing blocks by Misumi
  • GT3 pulleys by Misumi, GT3 belts by Gates
  • Meanwell PSU
  • 10mm rods and bearing blocks by Misumi

 
CaribouDuet can be configured to your needs with

  • Slice Engineering Mosquito, Mosquito Magnum or E3d hot end
  • Nozzle from Bondtech or Slice Engineering
  • BuildTak or Thekkiinngg sheet
  • and more options

 CaribouDuet is available in three print heights: 220mm, 320mm, and 420mm. Plastic parts offer best sturdiness and functionality and come with a sleek design. 


Currently there is a 6-8 week lead time for all combinations for new orders!

 

Height
  • 220
  • 320
  • 420
Hotend
  • E3d
  • Mosquito
  • Mosquito Magnum
Heater
  • E3D 40W
  • SE 50W
Thermistor
  • E3d
  • SE
Nozzle Brand
  • Bondtech
  • Slice Engineering
Nozzle Width
  • 0.4 mm
  • 0.6 mm
  • 0.8 mm
Steel Sheet
  • BuildTak
  • THEKKIINNGG
Display Installation
  • Top
  • Front

 

Caribou is rigid, reliable, customizable and features:

  • 3030 Aluminium Extrusions by MISUMI
  • Hardened Steel Rods by MISUMI
  • LMU10, LMUW10 Bearings by MISUMI
  • Slice Engineering MOSQUITO Hotend Option
  • Bondtech extruder 
  • Bondtech Coated Nozzle, SE Vanadium optional
  • 10mm Rods on x,y,z axis
  • MK52 block version
  • MK52 Heated Bed with Steel Sheet
  • Meanwell 320W PSU 
  • Duet2Wifi board
  • PanelDue 5"
  • Automatic mesh bed levelling
  • Magnetic PEI powder coat spring steel sheet
  • IR filament sensor
  • Reverse bowden set-up for smooth filament transport
  • P.I.N.D.A. 2 probe with included thermistor - faster temperature calibration
  • Integrated SD card controller (8GB included)
  • Layer height from 0,05 mm
  • Great build volume – 25 x 21 x 22 cm (width, depth, height)

Assembled Caribous are calibrated and live-z adjusted. You receive 2 test prints. After attaching PanelDue display and spoolholder you are ready to print.

 

You can configure your Caribou to your needs:


Options in detail:


Hot end:

  • E3d V6 
  • Slice Engineering Mosquito (only in combination with Bondtech extruder)
  • Slice Engineering Mosquito Magnum (only in combination with Bondtech extruder)


Heater Cartridge:

  • E3d 40W
  • Slice Engineering 50W (only with Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Thermistor:

  • E3d thermistor
  • Slice Engineering thermistor (only with 50W heater, Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Steel sheet:

  • BuildTak steel sheet with smooth PEI sheet
  • Thekkiinngg double sided,  PEI textured steel sheet

Nozzle Brand:

  • Bondtech: Nickel coated nozzle
  • Slice Engineering: Vanadium nozzle 

Included:

  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • 0.8kg of PLA filament by Fillamentum
  • 2 push-fit connectors and PTFE tube for reverse bowden set-up
  • Extruder cleaning tools
  • bag of Haribos

   

Firmware

Firmware RepRapfirmware is available here: https://caribou3d.com/en/content/10-caribou-firmware

Source code is available on github: https://github.com/Caribou3d/Caribou-Firmware

  


Dimensions:

  • depth: 45cm, width: 40cm, height: 46cm (220), 56cm (320, 66cm (420) without spool holder
  • allow 10cm more on the back for moving cables in the back if you want to use an enclosure
  • weight approx. 12kg

 

No reviews

Customers who bought this product also bought:

Product added to wishlist