Caribou 320 MK3s Rel 3 kit
Caribou 320 MK3s Rel 3 kit
Caribou 320 MK3s Rel 3 kit
Caribou 320 MK3s Rel 3 kit

Caribou 320 MK3s Rel 3 kit

€898.00

Bauen Sie Ihren Caribou MK3s selbst mit hochwertigen Komponenten von renommierten Marken. Es basiert auf einem starren Rahmen aus 30mm x 30mm großen Aluminium-Strangpressprofilen.

  • Einsy-Board von Ultimachine
  • Motoren, Display, Heizbett von LDO
  • Linearwellen, Lager und optionale Lagerblöcke von Misumi
  • GT3-Riemenscheiben von Misumi, GT3-Riemen von Gates

 
Caribou MK3s kann nach Ihren Bedürfnissen konfiguriert werden mit

  • Bondtech-Extruder
  • Slice Engineering Mosquito oder E3d hot end
  • Meanwell PSU
  • 10mm Linearwellen und Lagerblöcke von Misumi
  • LCD- oder OLED-Anzeige
  • und weitere Optionen

Caribou MK3s ist in drei Druckhöhen erhältlich: 220 mm, 320 mm und 420 mm. Die Kunststoffteile bieten beste Robustheit und Funktionalität und werden mit einem schlanken Design geliefert. 


Derzeit gibt es eine Vorlaufzeit von 3-4 Wochen für alle Kombinationen für neue Bestellungen!

  

Printed Parts
  • no
  • PETG translucent green
PSU
  • 250W
  • 320W Meanwell
Extruder
  • MK3s with Cool Motor
  • Bondtech MK3s
Hotend
  • E3d
Heater
  • E3D 40W
Thermistor
  • E3d
Steel Sheet
  • BuildTak
  • THEKKIINNGG
Rod diameter
  • 8mm
  • 10mm
Carriage
  • MK52
Display
  • LCD
  • OLED

 

Caribou is rigid, reliable, customizable and features:

  • 3030 Aluminium Extrusions by MISUMI
  • Hardened Steel Rods by MISUMI
  • LMU8, LMU10 Bearings by MISUMI
  • Slice Engineering MOSQUITO Hotend Option
  • Bondtech extruder option
  • 10mm Rods option
  • MK52 Heated Bed with Steel Sheet
  • Meanwell 320W PSU Option
  • MMU2 Compatibility
  • EINSY RAMBo motherboard with Silent Trinamic drivers with 256 microstepping
  • Automatic mesh bed levelling
  • Automatic skew axes compensation
  • Magnetic PEI powder coat spring steel sheet
  • IR filament sensor
  • Automatic loading of filament when filament is inserted
  • P.I.N.D.A. 2 probe with included thermistor - faster temperature calibration
  • Integrated LCD and SD card controller (8GB included)
  • 0,4mm nozzle (easily changeable) for 1,75 mm filament
  • Layer height from 0,05 mm
  • Great build volume – 25 x 21 x 22 cm (width, depth, height)

A detailed assembly Manual for Rel 3. is available in English and German!

Please download here: https://caribou3d.com/en/content/9-build-manual

 

You can configure your Caribou to your needs:


Options in detail:

PSU:

  • 250W PSU
  • 320 W Meanwell PSU


Extruder:

  • Caribou MK3s Rel 2 extruder with Bondtech gear and Cooler Stepper motor
  • SLS printed, geared (ratio 3:1) Bondtech extruder 


Hot end:

  • E3d V6 
  • Slice Engineering Mosquito (only in combination with Bondtech extruder)
  • Slice Engineering Mosquito Magnum (only in combination with Bondtech extruder)


Heater Cartridge:

  • E3d 40W
  • Slice Engineering 50W (only with Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Thermistor:

  • E3d thermistor
  • Slice Engineering thermistor (only with 50W heater, Meanwell PSU, Bondtech and Mosquito or Mosquito Magnum)


Steel sheet:

  • BuildTak steel sheet with smooth PEI sheet
  • Thekkiinngg double sided,  PEI textured steel sheet


Rod diameter:

  • 8mm rods on x, y, and z axes, LMU8 bearings
  • 10mm rods on x, y, and z axes, 55mm LMUW10 bearings on z axis and upper x axis

Bed carriage:

  • standard MK52 carriage
  • MK52 block version: carriage is supported by LHBB10 aluminium bearing blocks (available only with 10mm rods

Display:

  • standard 2004 LCD display (blue background, white foreground)
  • high contrast OLED display (black background, white foreground)

Included:

  • SDCard
  • Power cable (EU, or UK or US)
  • USB cable
  • Extruder cleaning tools
  • bag of Haribos

Firmware

Compiled firmware is available here: https://caribou3d.com/en/content/10-caribou-firmware

Source code is available on github: https://github.com/Caribou3d/Caribou-Firmware

  

Dimensions:

  • depth: 45cm, width: 40cm, height: 56cm without spool holder
  • allow 10cm more on the back for moving cables in the back if you want to use an enclosure
  • weight approx. 12kg

 

Optional plastic parts:

Plastic parts can be ordered for MK3(s) Rel. 3. Please see below for options.

STLs and STEP files are available on github: https://github.com/Caribou3d/Caribou-MK3

Please allow up to 10 days before shipping when you order plastic parts.

 
You receive all printed parts for building a Caribou MK3 Rel 3. Printed in PETG and Extrudr Pro Black 

  • 0.2mm layer height
  • 35% infill
  • Print time 100h
  • weight approx. 1.2 kg depending on configuration

Full list of printed parts (depending on the selected options):

 

 

 

 

50 Items
No reviews

Customers who bought this product also bought:

Product added to wishlist